Refer to the data sheets for coverage rates and re-coat times. The data sheets reflect the maximum rates of coverage under perfect substrate conditions i.e. smooth surface with no defects, no chip flakes, and also doesn't include covering side walls. When estimating coverage assume the 80% rule. If the sheets say 350 feet per gallon it is best to plan on (.80 x 350=~280). Coverage rates are correct but only at the applied thickness listed on the sheets. YOU DON'T WANT TO BE SHORT ON MATERIAL!!! Most of the materials can be applied with a high quality 1/4" or 3/8" nap roller, mohair roller, or a squeegee. Please refer to the Product Application section of the data sheet.

One major exception to the above rule is the products AD348 urethane.  This product must be applied per data sheet due to it's nature to create multiple "fish eye" appearance's on the surface after it dries, if it goes on thicker than the suggested coverage rate.  AD348 is a 3 component (non-skid agent added) product versus a 2 part  product.  The third component is HWS additive that is added to urethane's. Please read the data sheet for detailed information on that product.

[ home ] [ Toledo Area Installs ] [ Instructions ] [ Data Sheets ] [ Definitions ] [ Troubleshoot ] [ F.A.Q ] [ Contact Us ] [ Testimonials ]