THIS IS A COMPLETE EPOXY INSTALLATION KIT suggested for a 2 CAR GARAGE 400-550 SQFT. 1/4" Chip flakes and 2 coats - base coat and clear coat.

AD707LVP - 3 gallons of high solids epoxy base/prime coat. This coat is formulated to have priming properties and still be as durable as 100% solids epoxy and easy to install, roller only.

AD356PAVOC - 1 gallon Urethane Top coat - This very high grade single componet urethane only available in kits for now.

Watch installation video, review instructions before starting. Feel free to send us an e-mail with any further questions. An expert installer will reply soon!

Video shows a primer and use of a squeegee for spreading base coat. - the Easy Install Kit does not contain AD144 primer. Max Kit Pro does come with AD144.

The epoxy base coat with this Easy Install Pro kit is the AD707LVP (low viscous high solids). No squeegee needed and superior to those kits that use 100% solids only with no primer because our base coat epoxy has some priming properties.

Along with the wet material you will also get:
- 5 lbs. chips
- (2) 18" 3/8 nap roller covers
- 18" roller frame
- (2) 3" cut-in brushes
- (2) paint sticks
- Mixing adapter for electric drill.
- Non-skid agent to add to urethane. (Optional)
- Spiked Shoes - Wear while spreading AD707LVP base coat and when hand broadcasting chips.
- (2) pair rubber gloves

Items you will need:
- Masking tape
- Painters tarp
- (1) five gal bucket
- (1) 2.5 gal pail or larger bucket (for urethane)
- Acid etch solution - It is not feasible for us to sell this item. Cost/value is not favorable for the customer. We suggest purchasing this item from pool store or hardware store. (Make sure to neutralize acid when rinsing. Baking soda and water mixture rinse. This will remove the powdery residue that is left behind from the acid etch allowing better adhesion from the basecoat. Also, if there are oil stains then a degreaser on those spots is recommended.