THIS IS A COMPLETE EPOXY INSTALLATION KIT suggested for a 2 CAR GARAGE 400-475 SQFT. 1/4" Chip flakes and 3 coats - primer, base coat and clear coat.

(If this is for a basement floor please specify and you will receive AD30 urethane and price will be adjusted after purchase automatically)

Watch installation video, review instructions before starting. Feel free to send us an e-mail with any further questions.

AD15  - 2 gallons primer
AD707 - 3 gallons of 100% solids epoxy base coat.
AD322 - 1.5 gallons of Urethane Top coat.  (Cannot ship to CA. - You will receive AD30 and price will be adjusted.) 


Along with the wet material you will also get:
- 10 lbs. chips
- (3) 18" 3/8 nap roller covers
- 18" roller frame
- 9" 3/8" nap roller cover (use for base coat)
- (3) 3" cut-in brushes
- (3) paint sticks
- 18" 1/8" Notched squeegee
- Taper to threaded poll adapter - for squeegee
- Mixing adapter for electric drill.
- Non-skid agent to add to urethane. (Optional)
- Spiked Shoes - Wear while spreading AD707 base coat and when hand broadcasting chips.
- (3) pair rubber gloves

For floors greater than 475 sqft order more material and adjust application rate.  Example:  600 sqft order additional gal of AD15, 1.5 gals of AD707 and .75 gals of AD322.

- 1 (9" roller frame)
- Masking tape
- Painters tarp
- (2) five gal buckets
- (1) 2.5 gal pail or larger bucket (for urethane)
- Acid etch solution - It is not feasible for us to sell this item. Cost/value is not favorable for the customer. We suggest purchasing this item from pool store or hardware store.
(Make sure to neutralize acid when rinsing. Baking soda and water mixture rinse. This will remove the powdery residue that is left behind from the acid etch allowing better adhesion from the basecoat. Also, if there are oil stains then a degreaser on those spots is recommended.