| |
Factory tough industrial textured epoxy coating |
Materail below is for up to 550 sqft. |
| AD134 - 2 gals for a two car garage |
| AD85 - 3 gals |
| Purchase both prodcuts in the same color. A 1/8" notched squeegee is a must with AD85. After squeegeed out, evenly roll AD85 until floor is coated then roll in the direction you want the texture. Most common direction is rolling towards the doors. |
|
|
|
|
 |
MORTAR FORMULATIONS
Epoxy Mortar is a heavy duty, trowel-on floor topping that can be used to patch or resurface concrete, metal, and wood floors. Epoxy Mortar is composed of a unique blend of aggregates and polymer resins. which offers superior durability and resistance to heavy traffic. When applied at 1/4 inch thickness over concrete, it has higher impact and abrasion resistance than a six inch concrete slab. Epoxy Mortar also withstands the abuse of a wide range of chemicals, acids, alkalis, fatty greases, salts and solvents.
Epoxy Mortar can be troweled directly onto the floor without prior application of a bonding agent however a primer is recommended. Epoxy Mortar can also be used to repair holes and complete other patch jobs.
| AD1 - cove base formulation |
|
|
30-40 linear ft with this kit size and using a 1" radius 4" high cove. |
| AD010 - Hand trowel epoxy mortar |
|
|
 |
| AD210 - Self leveler resurfacer |
|
|
|
| AD501 - Epoxy cement overlay |
|
|
|
| AD811- Crack Filler (low modulus fast set gel) |
|
2 gal kit contains 1 gal part A and 1 gal part B. Same 1:1 ratio for other sizes.
ex. 1/2gal kit=
1qt A:1qt B |
 |
| AD05 - Patch kit resurfacer |
|
|
|
|
|
|
epoxy | adpolymers
|
