-AD249- AD249 is a two component high solids epoxy system designed for application where a low build epoxy is needed to seal the surface of a previously placed epoxy mortar overlay system without changing the existing texture of the mortar. This product has good wear resistance and superb chemical resistance and can be top coated with other products.

-AD247- AD247 is a two component novolac epoxy primer in colors. AD247 offers high solids, good substrate penetration and low odor. This primer reduces air release generation from the substrate when applying higher solids novolac topcoats. This will result in fewer surface imperfections in high build and self leveling type coating.

-AD246M- AD246M is a three component 100% solids epoxy mortar designed for applications where splash and spills of acids and chemicals occur.

-AD246- AD246 is a two component 97% solids novolac clear coating that can be used either as a coating or filled with paint chips, marble chips, and colored sand mixtures to provide an infinite array of color schemes or patterns. This product is suitable for medium to high build applications.

-AD245- AD245 is a two component 100% urethane/epoxy hybrid coating designed for applications on traffic surfaces exposed to vehicular or foot traffic for either exterior or interior applications. The toughness and elongation eliminate the need to repair hairline cracks.

-AD244- AD244 is a two component 100% solids novolac crack filler (gel) designed for shallow repairs on either vertical or horizontal surfaces. Because AD244 is a 100% solids formulation, it can be applied thicker on horizontal surfaces when required.

-AD243SL- AD243SL is a two component plus aggregate colored high solids novolac epoxy coating designed for applications where splash and spills of acids, chemicals and solvents occur.

-AD243- AD243 is a two component colored high solids novolac epoxy coating designed for application where splash and spills of acids, chemicals, and solvents occur.