Skid Proofers / Epoxy Skid Proof

Skid Proofer -AD200- AD200 is a two component plus aggregate colored high solids epoxy coating that provides a chemical resistant non-slip surface that can stand up to heavy industrial traffic. This product is available in both a regular and super non-slip texture. Recommended for coating of concrete, wood or steel for skid proofing ramps, stairs, loading docks, catwalks or other hazardous areas indoor or outdoors. -AD129R- AD129R is a three component 100% solids epoxy incorporating the addition of rubber granules to provide texture and slip resistance. This formulation has excellent elongation and is designed to be self priming. The toughness and elongation eliminate the need to repair hairline cracks. Recommended for general walking surfaces.	AD804R
-AD6- AD6 is a two component plus aggregate water based epoxy skidproofer that exhibits characteristics for chemical resistance, abrasion resistance, and substrate penetration rivaling solvent base products. Recommended for skid proofing of concrete. This product is suitable for bare foot traffic such as in locker rooms, plants or other areas where slips could occur. ADHWS- High Wear System High Performance Urethane Add to any urethane only. Amount used per gallon is dependant on how much non-skid is desired. Average amount is one pint per mixed gallon of urethane. Add it to urethane while mixing and make sure it stays suspended in the liquid during applying urethane to floor. May have to agitate/mix while applying. AD804R is an elastomeric copolymer rubber based liquid with rubber granules incorporated to provide texture and slip resistance. The modified formulation has excellent elongation, UV resistance and weathering characteristics. This flexible textured membrane also has excellent resistance to ozone as well as low temperature flexibility. AD804R liquid rubber walkway has displayed good adhesion to many properly prepared substrates including EPDM. Most common roof substrates such as wood, metal, EPDM, APP, TPO, and Hypalon.