Professional Grade Epoxy Coatings

Call 419-344-7971

Buy: Urethane Top Coats

 

Urethane is used as a topcoat for added protection. For a single color floor system a pigmented urethane over top of a base coat that meets your needs is a superior choice than using a clear urethane. Not recommended over metallic floors unless a mechanical sanding is done over the entire surface.


AD-U2 - Choose when you need a pigmented top coat.
AD-PAVOC - Single componet urethane coating for use over flake systems that are not full broadcast. 

AD-U4 - Choose when you need an odorless clear or pigmented top coat in doors.
AD-HWS - Add to any urethane - pour up to one pint in to a 1gallon/1.5 gal.

 

AD-U2 (Solvent based)(Colors available) - Has an odor - 2 componet - 1.5 gal is smallest size available.  1.5 gal covers 450-600 sqft.

AD-PAVOC (Solvent based)(Clear Only)-   Single componet/part, no mixing.  1 gal covers 400 sqft. (1 Qt avail for sample or repairs)

AD-U4 (Water based)(Colors available) For indoor uses- Oderless.  High gloss clear, yields 1.5 gals mixed, and high gloss pigmented urethane, yields 1.75 gals. (1 gal part A .5 part B and .25 pigment) = 1.75.

AD-HWS - Anti-slip additive. Add to the urethane before rolling on floor. Make sure to watch the last pour as there will be material that has collected on the bottom of the bucket.  Best to stir as you use this product. Typical amount is one pint per gallon and a half of urethane.

 

Choose size and color after adding to cart.

5 Item(s)

Set Descending Direction
per page

Grid  List 

5 Item(s)

Set Descending Direction
per page

Grid  List 

Credit Card Processing